How to Prune Different Species of Hydrangeas (2022)

What You'll Need

Equipment / Tools

  • Bypass pruners

Materials

  • Lawn waste bag(s)

Instructions

How to Prune Bigleaf Hydrangea (H. macrophylla)

Bigleaf hydrangeas are one of the species that bloom on old wood, meaning they set their flower buds from late summer to early fall. Thus, if you mistakenly prune in the spring or even late fall, it will remove the flower buds and any chance of getting blooms for a year. Bigleaf hydrangeas actually do fairly well without any pruning at all, but if necessary to control its shape or size, do the pruning carefully just after the flowers have faded, never removing more than one-third of their total growth.

How to Prune Different Species of Hydrangeas (1)

  1. Deadhead Spent Flowers

    Spent flowers can be trimmed away as they fade to keep the plant looking tidy. Simply clip away the blooms using bypass pruners.

  2. Prune Away Dead and Weak Stems

    When most of the flowers have faded, it's time for pruning. Begin by pruning away stems that are clearly dead or weak. But don’t prune all the old wood because this is what will keep flowering as the new growth matures.

  3. Prune for Size

    If your hydrangea has outgrown its space and you need to prune it, you can prune away select branches to curtail its size. Prune away select branches all the way to ground level or to a main stem, but make sure to retain some healthy branches to avoid losing all the flowers. A bigleaf hydrangea can be pruned back by one-third of its total mass, but harsher pruning will weaken the shrub and cause it to languish for a season or two.

    Tip

    Bigleaf hydrangea is the variety most susceptible to winter bud injury. If you live in an area with severe winters, you might need to offer it some protection. Tying the branches together and wrapping them with burlap can help the plant survive winter. Remove the burlap when the buds begin to swell.

How to Prune Smooth Hydrangea (H. arborescens)

Smooth hydrangea, including the popular cultivars H. arborescens 'Grandiflora,' 'Annabelle', and 'Incrediball', doesn't usually have any problems blooming, though its white flowers aren't as showy as we normally expect from hydrangeas. It's a round shrub with leaves that are somewhat rounded with a pointed end, paler on the underside than on the top. Blooming on new wood, smooth hydrangea does well with fairly aggressive pruning.

How to Prune Different Species of Hydrangeas (2)

  1. Remove Dead or Injured Branches

    This shrub blooms on new wood, so pruning should be done in early spring to ensure plenty of growth for flowers. Begin by removing any branches that have been injured or killed over the winter. These branches should be removed back to the main stem or even to ground level.

  2. Trim for Shape

    Additional branches can be lightly trimmed to shape the plant and retain its rounded shape. This kind of light pruning produces a large shrub with many small flower heads. "Light trimming" in this case means removing as much as one-third of each stem's length.

  3. Prune Hard for Large Flowers

    Hard pruning of a smooth hydrangea ( 12 to 18 inches from the ground) often creates a shrub that produces fewer, but much larger flower heads. These flowers may be so large that they require propping.

How to Prune Panicle (Peegee) Hydrangea (H. Paniculata)

Also known as peegee hydrangea, panicle hydrangeas produce football or cone-shaped flower clusters in mid-to-late summer. The flowers start out white, cream, or green and slowly turn pink, drying and remaining on the plant long after the leaves have fallen. Panicle hydrangea blooms on new wood; it accepts—and even prefers—fairly heavy pruning.

  1. Deadhead Spent Flowers

    During the growing season, you can deadhead the flowers (remove spent flowers) as they fade. This often helps prolong the bloom season as the plant puts more energy into continued blooming.

  2. Prune Lightly to Maintain Shape

    As soon as the flowers become unattractive, clean up the overall shape of the plant with selected pruning of branches that spoil the shrub's aesthetics. Panicle hydrangea makes for an attractive shrub even after flowering is complete.

  3. Do Hard Pruning in Late Winter or Early Spring

    Flower buds occur on new spring growth with this shrub. Some hard pruning of individual stems in late winter or early spring not only will keep the plant from becoming overgrown but also will encourage healthy growth and flowers. Panicle hydrangeas can be pruned by 1/3 of their total mass without damage to the plant. This is best done by pruning out smaller wood all the way to ground level, leaving only the larger stems—which can also be partly trimmed back if needed to maintain size.

    How to Prune Mountain Hydrangeas

    Mountain hydrangeas are small flowering shrubs with narrow, pointed leaves and flattened flower heads. This plant is sometimes confused withHydrangea macrophyllabecause of their similar flowers. However, this type doesn't have the big leaves of Hydrangea macrophylla.Pruning should be done cautiously—or not at all, if not required to control the shrub's shape. Blooming occurs on old wood, and the plant's pruning needs are minimal.

  4. Remove Dead or Dying Stems in Early Spring

    Any dead or winter-damaged stems can be removed all the way to ground level with pruners in early spring, before new growth has started

  5. Prune for Shape

    If major pruning is necessary, wait until the shrub has finished flowering to trim back stems to a pair of healthy buds, using bypass pruners. This is not a shrub that always requires annual pruning.

How to Prune Climbing Hydrangeas

The stunning climbing hydrangea is the type you see slowly making its way up a tree or other support. Rather than a classic shrub, it is a woody vine and it normally requires little to no pruning except to control its size. This plant flowers on old wood grown during the previous season, so any major pruning you do should be done immediately after the plant flowers.

  1. Prune to Control Size

    Once climbing hydrangeas become established, they can grow quite vigorously and might need occasional hard pruning to set boundaries for the coming season. Do this pruning immediately after the plant flowers. Most flowers occur at the top of these plants, so side trimming will have less impact on the plant's appearance.

  2. Special Pruning to Rejuvenate a Neglected Plant

    Neglected, overgrown vines can be cut back to ground level in early spring to rejuvenate the plant. However, you can expect this to reduce flowering fairly dramatically for one or two seasons.

How to Prune Oakleaf Hydrangeas (H. quercifolia)

Oakleaf hydrangea is easily recognized by itsoak leaf-shapedfoliage. Because its major attraction is the foliage, any loss of blooms is less disappointing than in most other hydrangea varieties. Oakleaf hydrangea flowers on old wood and major pruning should occur immediately after it has finished flowering. Be somewhat cautious when pruning an oakleaf hydrangea—prune is done to control size or shape, not to stimulate new growth.

How to Prune Different Species of Hydrangeas (3)

  1. Prune Out Winter Dieback

    Inspect your shrub in the early spring before growth has begun. If your shrub has experienced winter dieback, prune the stems back to below the point of injury. Further pruning should wait until the plant has finished flowering.

  2. Prune for Shape

    Oakleaf hydrangea blooms on old growth, so any hard pruning that's required should be done immediately after it has finished flowering. Use sharp bypass pruners to remove branches that interfere with the desired shape of the shrub. This variety is not fond of heavy pruning, so never remove more than one-third of the plant's total mass, and don't feel obliged to prune at all unless it is essential to maintain the plant's size or shape. Cut selected stems back to just above the point where they meet the main stems.

How to Dry and Preserve Hydrangea Flowers

Top Articles

You might also like

Latest Posts

Article information

Author: Nathanael Baumbach

Last Updated: 08/03/2022

Views: 5583

Rating: 4.4 / 5 (75 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Nathanael Baumbach

Birthday: 1998-12-02

Address: Apt. 829 751 Glover View, West Orlando, IN 22436

Phone: +901025288581

Job: Internal IT Coordinator

Hobby: Gunsmithing, Motor sports, Flying, Skiing, Hooping, Lego building, Ice skating

Introduction: My name is Nathanael Baumbach, I am a fantastic, nice, victorious, brave, healthy, cute, glorious person who loves writing and wants to share my knowledge and understanding with you.